Anwar, Fitria Maulidiah (2023) Sintesis senyawa Bi4Ti2,95Fe0,05O12 dengan menggunakan metode lelehan garam NaCl, KCl, dan campuran NaCl/-KCl. Undergraduate thesis, Universitas Islam Negeri Maulana Malik Ibrahim.
|
Text (Fulltext)
18630058.pdf - Accepted Version Available under License Creative Commons Attribution Non-commercial No Derivatives. Download (1MB) | Preview |
Abstract
ABSTRAK:
Bismut Titanat (Bi4Ti3O12) merupakan salah satu senyawa Aurivillius lapis tiga yang mempunyai sifat fotokatalis dengan energi celah pita sebesar 2.92 eV. Morfologi dan ukuran partikel material fotokatalis dilaporkan berpengaruh pada kemampuan aktivitas fotokatalis. Metode yang dilaporkan dapat menghasilkan morfologi dan ukuran partikel yang seragam adalah metode lelehan garam dan salah satu faktor yang mempengaruhi morfologi dan ukuran partikel yang dihasilkan lewat metode lelehan garam adalah jenis garam. Pada penelitian ini telah disintesis senyawa Bi4Ti2,95Fe0,05O12 dengan metode lelehan garam NaCl, KCl, dan campuran NaCl/-KCl dan selanjutnya dikarakterisasi menggunakan instrument XRD (X-Ray Diffraction), SEM-EDS (Scanning Electron Microscopy-Energy Dispersive Spectroscopy), dan UV-Vis DRS (Ultraviolet-Visible Diffuse Reflectance Spectroscopy). Kemudian dikaji pengaruh jenis garam klorida pada struktur kristal, morfologi, dan ukuran partikel yang diperoleh. Difraktogram sampel produk menunjukkan senyawa Bi4Ti2,95Fe0,05O12 berhasil disintesis. Namun, pada sampel yang disintesis dengan garam tunggal NaCl ditemukan pengotor yaitu Bi2Ti4O11, Bi2O3 dan TiO2 rutill. Mikrograf SEM menunjukkan sampel produk menggunakan garam NaCl, KCl, dan campuran NaCl/-KCl menghasilkan morfologi plate-like dengan ukuran partikel pada garam NaCl berukuran lebih besar yaitu 3,707,32 nm dibandingkan garam KCl (2205,87 nm), campuran NaCl/-KCl (1:3,5:3,5) (2262,63 nm) dan NaCl/-KCl (1:7:7) sebesar 2248,06 nm. Sedangkan hasil perhitungan dengan menggunakan persamaan Kubelka-Munk menunjukkan bahwa energi celah pita Bi4Ti2,95Fe0,05O12 pada rentang 2,21-2,29 eV.
ABSTRACT:
Bismuth Titanate (Bi4Ti3O12) is one of the three-layer Aurivillius compounds which has photocatalyst properties with a bandgap energy of 2.92 eV. The morphology and particle size of the photocatalyst material are reported to have an effect on the activity of the photocatalyst. One method that can produce uniform morphology and particle size is the salt melt method. One of the factors that affect the morphology and size of the particles produced is the type of salt used. In this study, Bi4Ti2,95Fe0,05O12 was shynthesis using molten method of salt NaCl, KCl, and mixture of NaCl/-KCl and then characterized using an XRD instrument (X-Ray Diffraction), SEM-EDS (Scanning Electron Microscopy-Energy Dispersive Spectroscopy), and UV-Vis DRS (Ultraviolet-Visible Diffuse Reflectance Spectroscopy). Then studied the effect of the type of chloride salt on the crystal structure, morphology, and particle size obtained. Product sample diffractogram showing Bi4Ti2,95Fe0,05O12 successfully synthesized. However, in the samples synthesized with single salt NaCl, an impurity was found, namely Bi2Ti4O11, Bi2O3 and TiO2 rutil. SEM micrographs show product samples using NaCl salt, KCl, and a NaCl/-KCl mixture produce a plate-like morphology with a larger particle size in NaCl salt 3.707.32 nm compared to KCl salt (2205.87 nm), mixture NaCl/-KCl (1:3.5:3.5) (2262.63 nm) and NaCl/-KCl (1:7:7) is 2248.06 nm. While the results of calculations using the Kubelka-Munk equation show that the bandgap energy Bi4Ti2,95Fe0,05O12 in the range of 2.21-2.29 eV.
الملخص:
تيتانات البزموت (Bi4Ti3O12) هي واحدة من مركبات أوريفيليوس Aurivillius ثلاثية الطبقات التي لها خصائص محفز ضوئي مع طاقة فجوة نطاق تبلغ 2,92 eV. تم الإبلاغ عن أن مورفولوجيا وحجم الجسيمات لمادة المحفز الضوئي لها تأثير على قدرة نشاط المحفز الضوئي. الطريقة التي تم الإبلاغ عنها لتكون قادرة على إنتاج مورفولوجيا موحدة وحجم الجسيمات هي طريقة ذوبان الملح وأحد العوامل التي تؤثر على مورفولوجيا الجسيمات وحجمها ما يتم إنتاجه من خلال طريقة ذوبان الملح هو نوع من الملح. في هذه الدراسة، تم تصنيع مركبات Bi4Ti2,95Fe0,05O12بطريقة ذوبان الملح NaCl و KClومخاليط من NaCl/-KCl وما إلى ذلك تتميز باستخدام الأدوات وحيود الأشعة السينية (XRD) ، والتحليل الطيفي للمسح المجهري الإلكتروني - الطاقة المشتتة (SEM-EDS) ، بالأشعة فوق البنفسجية المرئية (UV-Vis DRS) ثم درس تأثير نوع ملح الكلوريد على المركب والتشكل وحجم الجسيمات التي تم الحصول عليها. أظهر حيود عينات المنتج مركبات Bi4Ti2,95Fe0,05O12تم تصنيعها بنجاح. ومع ذلك، في العينات التي تم تصنيعها بملح واحد من NaCl وجدت شوائب وهي Bi2Ti4O11 و Bi2O3 و TiO2الروتيل. تنتج الصور المجهرية SEM التي تظهر عينات المنتج باستخدام مخاليط NaCl و KCl وNaCl/-KCl مورفولوجيا تشبه الصفائح مع حجم الجسيمات في الملح NaCl أكبر عند 3،707،32 نانومتر من ملح KCl (2205،87 نانومتر)، وهو مخاليط NaCl/-KCl من (1:3،5:3،5) (2262،63 نانومتر) و NaCl/-KCl(1:7:7) من 2248،06 نانومتر. بينما أظهرت نتائج الحساب باستخدام معادلة Kubelka-Munk أن طاقة فجوة النطاق Bi4Ti2,95Fe0,05O12 في نطاق 2.21-2.29 eV
Downloads
Downloads per month over past year
Actions (login required)
![]() |
View Item |