Zuhria, Viky Arina (2015) Sensor kimia stik menggunakan reagen 4-(2-Pyridylazo) resorcinol (PAR) untuk deteksi logam berat tembaga (II) pada sampel limbah industri kertas proses deinking. Undergraduate thesis, Universitas Islam Negeri Maulana Malik Ibrahim.
|
Text (Fulltext)
11630026.pdf - Accepted Version Available under License Creative Commons Attribution Non-commercial No Derivatives. Download (2MB) | Preview |
Abstract
INDONESIA:
Pencemaran lingkungan dapat mengakibatkan kerusakan lingkungan, sesuai yang dijelaskan Q.S Ar-Rum (30): 41. Limbah industri kertas proses deinking mengandung Cu2+. Dalam penelitian ini dibuat sensor kimia stik menggunakan reagen PAR untuk analisis Cu2+. Tujuan penelitian ini adalah menentukan kondisi optimum pembentukan [Cu(PAR)2] serta mengetahui kinerja sensor kimia stik untuk analisis Cu2+ dalam sampel limbah industri kertas proses deinking pada rentang konsentrasi 0–3,0 ppm.
Optimasi parameter analitik dalam pembentukan [Cu(PAR)2] dilakukan dengan menentukan waktu kestabilan, pH, dan konsentrasi PAR optimum. Uji selektivitas dilakukan dengan penambahan Zn2+ menggunakan perbandingan 1:1, 1:10, dan 1:100. Gangguan dari Zn2+ dikurangi dengan penambahan Na2HPO4. Sensor kimia stik yang mengandung PAR dibuat dengan metode sol-gel menggunakan prekusor tetraetilortosilika (TEOS) dan dilapiskan pada kertas whatman. Interaksi antara PAR dan kertas whatman diidentifikasi dengan spektrofotometer infra red (IR). Uji kinerja sensor kimia stik dilakukan dengan mengaplikasikan sensor untuk deteksi kadar Cu2+ dalam sampel limbah industri kertas proses deinking, dan hasil yang didapatkan dikonfirmasi dengan spektrofotometer serapan atom (SSA).
Hasil optimasi parameter analitik adalah dalam rentang waktu 40–240 menit [Cu(PAR)2] stabil dengan pH optimum 7,0 dan konsentrasi optimum PAR 20,0 ppm. Uji selektivitas menunjukan logam Zn2+ mulai mengganggu pada perbandingan 1:1. Konsentrasi optimum Na2HPO4 untuk mengurangi gangguan Zn2+ adalah 0,5 M. Hasil IR menunjukkan terjadi interaksi fisik antara kertas whatman dan PAR. Berdasarkan intensitas warna merah yang dihasilkan sensor kimia stik, kandungan Cu2+ sampel A, B, dan C adalah 0,25; 0,25; dan 1,0 ppm. Setelah dikonfirmasi dengan SSA, dapat disimpulkan kandungan Cu2+ dalam sampel limbah industri kertas proses deinking tidak melebihi ambang batas.
ENGLISH:
Environmental defilement be able to involve damage to the environment, as described on Surah Ar-Rum (30): 41. Industrial waste paper deinking process containing Cu2+. In this research, chemical sensor stik had been manufactured utilize by PAR reagent for Cu2+ analysis. The purpose in this research are to find out the optimum conditions of [Cu(PAR)2] formation and determine the chemical sensor stick performance for the Cu2+ analysis in the industrial waste paper deinking process sample with a concentration span 0 - 3.0 ppm.
Optimization of analytical parameters in the [Cu(PAR)2] formation was carried out by determining the stability period, pH, and PAR optimum concentration. Selectivity analysis was carried out by addition of Zn2+ with 1:1, 1:10, and 1:100 ratio. Interference of Zn2+ could be handled by Na2HPO4 addition. Chemical sensor stick that containing PAR was manufactured by sol-gel method conducting by tetraetilortosilika (TEOS) precursor and coated on the whatman paper. Interaction between PAR and whatman paper was identified by infra-red spectrophotometer (IR). Chemical sensor stick performance analysis was excused by applying a sensor to detect the levels of Cu2+ in the sample of industrial waste paper deinking process, and the results obtained was confirmed by Atomic Absorption Spectrophotometry (AAS).
The result of analytical parameters optimization were, in the span 40 - 240 minutes [Cu(PAR)2] was stable with optimum pH of 7.0 and PAR concentration of 20.0 ppm. Selectivity analysis showed that Zn2+ interfere at 1:1 ratio. The Na2HPO4 optimum concentration to handling Zn2+ was 0.5 M. IR characterization showed that there is physical interaction between whatman paper and PAR. Based on the red color intensity that produced by chemical sensor stick, Cu2+ content of the sample A, B, and C was 0.25; 0.25; and 1.0 ppm respectively. After confirmed by , it can be found that Cu2+ content in the industrial waste paper deinking process sample does not exceed the threshold.
Item Type: | Thesis (Undergraduate) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Supervisor: | Yulianti, Eny and Syarifah, Umaiyatus | |||||||||
Contributors: |
|
|||||||||
Keywords: | Sensor Kimia; PAR; Tembaga (II); Sol-Gel; Limbah Industri Kertas Proses Deinking; Chemical Sensor; Copper (II); Sol-Gel; Industrial Waste Paper Deinking Process | |||||||||
Departement: | Fakultas Sains dan Teknologi > Jurusan Kimia | |||||||||
Depositing User: | Ratih Novitasari | |||||||||
Date Deposited: | 27 Jun 2016 12:02 | |||||||||
Last Modified: | 27 Jun 2016 12:02 | |||||||||
URI: | http://etheses.uin-malang.ac.id/id/eprint/3196 |
Downloads
Downloads per month over past year
Actions (login required)
![]() |
View Item |